How to Use Reverb on BIAS Head/Rack?

BIAS Amp Desktop Standalone and Plug-In Version: 

Please follow the steps below:
1: Upgrade BIAS Amp Desktop Standalone or Plug-In to V1.6.0.4529.
You can also download and upgrade it at https://store.positivegrid.com/

Amp_1.6.0.4529.png
2:Connect BIAS Head/Rack to computer via USB and upgrade the firmware to V.0.5.2.193.Head_FW_0.5.2.193.png
3:Launch BIAS Amp Desktop and select Custom Knob tab under the setting menu.
Head_CustomKnob1.png


4: Set the Custom knob from Noise Gate (default setting) to any parameter of Reverb.
Reverb.png

5: Please adjust the Custom Knob on BIAS Head/Rack to see if it corresponds with the parameter you just set in BIAS Amp software.

6: There are 6 parameters and 9 Reverb styles you can select in the software.

Reverb Styles:
Reverb2.png
Reverb Parameters:
Reverb3.png


BIAS Amp for i-Pad: 

1: Upgrade BIAS Amp for i-Pad to V1.8.0.5248.
You can download and upgrade it at https://itunes.apple.com/tw/app/bias-amp/

iOS_Reverb_1.8.0.5248.PNG
2: Connect BIAS Head/Rack to i-Pad via Bluetooth, launch the app and select Custom Knob tab under the setting menu.
iOS_Reverb_CustomKnob.PNG
3: Set the Custom knob from Noise Gate (default setting) to any parameter of Reverb.
iOS_Reverb_List.PNG
Reverb Styles:
iOS_Reverb_Styles.PNG
Reverb Parameters:
iOS_Reverb_Parameters.PNG

















Was this article helpful?
1 out of 1 found this helpful
Need More Help? Contact Us

Comments

Article is closed for comments.