BIAS Amp Audio Settings (Mac)

 You can find the Audio Settings via Settings->Audio Settings in BIAS Amp

 

Screen_Shot_2017-12-20_at_2.30.45_PM.png 

 

Output Section

 

Screen_Shot_2017-12-20_at_2.35.38_PM.png

 

- Output Device

Select your audio interface as your Output Device

 

 

- Output Left/Right Channel

Choose the corresponding output(s) (on your audio interface) connected to your studio monitors/speakers or headphones. If you want a Mono output, please select the same Output number for both Left & Right Channels.

 

Input Section

 

Screen_Shot_2017-12-20_at_2.35.28_PM.png

 

- Input Device

Select your audio interface as your Input Device

 

- Input Left/Right Channel

Choose the corresponding input(s) (on your audio interface) connected to your guitar/instrument. If your guitar is only connected to one input (the most common scenario), please select the same Input number for both Left & Right Channels.

 

Sample Rate & Audio Buffer Size

 

 Screen_Shot_2017-12-20_at_2.34.49_PM.png 

 

- Sample Rate

Please choose the desired sample rate(supported by your audio interface)

 

- Audio Buffer 

Please choose the desired buffer size, please also refer to this link to set the optimal buffer size.

*We recommend 44100 sample rate/512 buffer size as a starting point*

 

Active MIDI Inputs

 

 Screen_Shot_2017-12-11_at_11.11.52_PM.png

 

Please select the MIDI inputs that you want to use

*Please Note: BIAS Amp does not support MIDI currently*

 

Was this article helpful?
4 out of 5 found this helpful
Need More Help? Contact Us