This is a dry/wet knob to control the amount of distortion that is mixed into delay signal path.
Drive Bypass Switch
Bypass the drive function on both wet and dry signal.
Delay Type Selector
The selector allows you to switch between Tape, Standard, Ping Pong, and Reverse delays.
Time, Note, Dot, Trip
When time mode is selected, this allows you to set Milliseconds, Note, Dot, and Trip options. This creates delay patterns based on the current global tempo, which you can set the global bpm in the lower bar.
Control the amount of time between your original signal and the delay output.
Sets the amount of feedback to determine the number of repeats.
Adjust the level balance between delay wet and dry signal.
Bass & Treble
Boost or cut the bass and high frequencies of delay signal.
Captures and freezes the current feedback loop.
This adds old school analog character to the wet signal.
Controls how much the Tape distortion affects the wet signal.
Sets the threshold of ducking function, which causes the delay signal to decrease when the dry signal exceeds the threshold level.
Adjust how much delay signal will be reduced.
Adjust how fast the volume decrease when the signal exceeds the threshold level.
Adjust how long it takes for the wet signal to return to normal when the input goes below the threshold.
The selector allows you to choose different modulation style add to the back of delay.
Controls the speed of modulation.
Controls the depth of modulation.
Widen the stereo sound of modulation.
Adjusts the dry/wet balance of modulation.
Control how much modulation interacts with the delay signal path. When set to “wet only”, modulation will only affect on the wet signal, when set to “normal”, modulation will affect on overall output.
Select the shape of modulation.