BIAS FX 2 Blocks the Audio/Sound from other Softwares


Please try the methods below:
1. In Windows sound/playback click on the device and under properties/advanced, untick 'Allow applications to take exclusive control of this device'.
 
2. Please make sure that the buffer size in BIAS FX 2 is not set too low, we recommend you to use 44100k sample rate and 512 buffer size as a start, you can check these settings via Settings (the gear icon) -> Audio Setting in BIAS FX 2. 

3.Please make sure that the sample rate for your input and output channels of your device match.

(1) Right-click on the speaker icon on the lower-right corner on your desktop, and click 'Open Sound settings', then go to the 'Sound Control Panel' on the right-hand side.
mceclip0.png
mceclip2.png

(2) Right-click the Microphone (or the desired input device, ex. Focusrite) and choose Properties.
mceclip3.png

(3) Click the Advanced tab and verify or change the Default Format option
mceclip4.png

(4) Click OK then click the Playback tab.  Right-click on your default or the desired output device and choose Properties

mceclip6.png

(5) Make sure the Default Format option matches what you selected for your recording channel.  

mceclip7.png



 
Was this article helpful?
31 out of 249 found this helpful
Need More Help? Contact Us