2. Please make sure that the buffer size in BIAS Pedal is not set too low, we recommend you to use 44100k sample rate and 512 buffer size as a start, you can check these settings via Settings (the gear icon) -> Audio Setting in BIAS Pedal.
3.Please make sure that the sample rate for your input and output channels of your device match.
(1) Right-click on the speaker icon in the lower-right corner of your desktop and choose Recording Devices
(1) Right-click on the speaker icon in the lower-right corner of your desktop and choose Recording Devices
(2) Right-click the Microphone (or desired input channel for the device) and choose Properties
(3) Click the Advanced tab and verify or change the Default Format option
(4) Click OK then click the Playback tab. Right-click on your default or desired output channel and choose Properties
(5) Make sure the Default Format option matches what you selected for your recording channel. (You'll notice in this screenshot, my playback device is configured for 48,000Hz while my microphone was configured for 44,100Hz. These need to match.)
Please try the methods below :
1. In Windows sound/playback click on the device and under properties/advanced, untick allow applications to take exclusive control of this device.