BIAS Head/Rack Factory Reset

Hardware Factory Reset

For BIAS Head:

1. First, make sure the power is Off.
2. Hold both the Utility Switches on the Back panel 'Up' and turn the power On—hold them until they alternate in flashing.
3. Once they are flashing, hold the Wireless button until it stays lit up in Blue. This will initiate the Factory Reset.
4. If at any point you decide not to Factory Reset after holding both utility switches, simply tap the Wireless Button to exit.

For BIAS Rack:

1. First, make sure the power is Off.
2. Hold both the Utility Switches on the Front panel 'Down' and turn the power On—hold them until they start flashing in an alternating fashion.
3. Once they are flashing, hold the Wireless button until it stays lit up in Blue. This will initiate the Factory Reset.

Factory Reset via Desktop

You can also perform a factory reset using BIAS Amp 2 Professional desktop software:

1. Connect your BIAS Head/Rack via USB to your desktop computer.
2. Launch BIAS Amp 2 Professional and select Factory Reset from the settings menu.
3. On the next screen, you will see a message explaining what the Factory Reset will do and asking if you want to proceed.
4. If yes, then select Reset and your Factory Reset will begin.

Factory Reset via Mobile (iPad/iPhone)

You can also perform a factory reset using BIAS Amp 2 iOS app:

1. First, connect via Bluetooth to your BIAS Head/Rack.
2. Launch the BIAS Amp 2 app and access Settings.
3. Select Reset Factory Default.
4. A confirmation box will appear—letting you cancel should you decide not to go ahead. If you want to proceed, select Reset and the Factory Reset will begin.

See Also

• How to Backup Amp Presets on the Device/Software
• BIAS Head/Rack User Manual