1. Help Center
  2. Spark 2
  3. Troubleshooting

Factory Reset for Spark 2

A factory reset restores your Spark 2 to its default state.

This will permanently erase:
  • All 8 onboard presets
  • Bluetooth pairing information
  • Power Saving settings
  • Looper tracks (cannot be backed up)
Back up your presets before resetting:
• Backup Presets Saved on the Spark Amp

Tutorial Video

Instructions

  1. Ensure the Unit is connected to the power supply and powered off:
    • Ensure the amp is connected to the power supply.
    • Make sure the amp is completely powered off.
    • Verify the Power Button LED is off before continuing.

  2. Perform Factory Reset:
    • Press and hold the Preset Knob, then press and hold the Power Button simultaneously.
    • Release both buttons when the Battery Indicator (next to the Power Button) turns white.
    • Hold the Power Button again until all four preset LEDs blink twice, then release.

  3. Restart Device:
    • The Spark 2 will power off and reset. Turn it back on to complete the process.

Was this article helpful?
137 out of 326 found this helpful
Still need help?
Our support team can help answer questions and solve problems.
Contact Support
Contact Support