Bluetooth Connection (Bluetooth Audio) for Spark EDGE

← Back to Spark EDGE User Guide

Which Bluetooth connection do you need?

Spark EDGE has two independent Bluetooth connections. Choose the one you need:

Connect to the Mobile Device (Bluetooth Audio)

1. Open the Bluetooth settings on your mobile device:
   iOS: Settings → Bluetooth
   Android: Settings → Connections → Bluetooth

2. Tap the BLUETOOTH PAIR button on the rear panel while Spark EDGE is powered on.

   Only the Bluetooth LED should breathe, indicating pairing mode.
3. In the Bluetooth settings on your mobile device, look for Spark EDGE Audio in the list of available devices.
4. Tap on Spark EDGE Audio to pair and connect.

Good to Know

Volume control

Use the MUSIC knob on the front panel to adjust Bluetooth playback volume on Spark EDGE. Volume can also be controlled from the source device (phone/tablet).

Output routing

Bluetooth audio streams through Spark EDGE's internal speakers, the L/MONO & R line outputs, and the headphone output.

Both connections at once

You can use Spark EDGE as a Bluetooth speaker while playing guitar - Spark EDGE mixes the Bluetooth audio and your guitar signal together, so you can jam over music from any app while editing tones with the Spark app.

Troubleshooting

Spark EDGE Audio doesn't appear in my Bluetooth list

• Make sure Spark EDGE is powered on and you pressed the BLUETOOTH PAIR button - the Bluetooth LED should be breathing.
• Try a factory reset on Spark EDGE and re-pair.

Paired successfully but no music plays

• Turn up the MUSIC knob on Spark EDGE.
• Check that your source device (phone/tablet) is not muted and volume is up.

Bluetooth keeps disconnecting

• Stay within Bluetooth range (~10 m / 30 ft) of Spark EDGE.
• Move away from Wi-Fi routers, microwaves, and other 2.4 GHz devices that can cause interference.
• Forget the device on your phone, then re-pair.

Still stuck? See Bluetooth Connection Troubleshooting for Spark EDGE for a full diagnostic guide.