Pairing the Spark EDGE with a mobile device via Bluetooth

Follow this guide to connect your Spark EDGE to the Spark app via Bluetooth or use the Spark EDGE as a Bluetooth speaker.

Connect to the Spark app (Tone Control)

1. 1. Power on the Spark EDGE. 
   2. Open the Spark app and tap 'Connect'.
      Make sure you turn on Bluetooth on your mobile device.
      
   3. The Spark app will start to search for nearby Spark EDGE devices.
   4. Select the Spark EDGE with the serial number if multiple Spark devices are present to ensure you’re connecting to the correct device.
      
      
      The serial number can be found on the side of the outer package and the bottom of the Spark EDGE.
      See also: How To Find My Product Serial Number?
   5. You'll see a 'Successfully connected' message when the Spark app is connected to the Spark EDGE.
   6. You can always check the connection status on the product card in the 'Menu' tab.
      

Connect to the mobile device (Bluetooth Audio)

1. 1. Open the Bluetooth settings on your mobile device:
      iOS: Settings → Bluetooth
      Android: Settings → Connections → Bluetooth
      
      
   2. Tap the PAIR button on the rear control panel while the Spark EDGE is powered on.
      
      Only the Bluetooth LED starts to breathe.
      
      
      

      If both the Bluetooth and Wi-Fi LEDs are breathing together, it means you held the pair button too long, and the Spark EDGE is now in pairing mode with Spark Control X. In this case, Spark EDGE Audio will not appear on the Bluetooth list.
      

   3. In the Bluetooth settings on your mobile device, look for Spark EDGE Audio in the list of available devices.
      
      
   4. Tap on Spark EDGE Audio to pair and connect.