1. Help Center
  2. Spark EDGE
  3. Troubleshooting

Factory Reset for Spark EDGE

A factory reset restores your Spark EDGE to its default state.

This will permanently erase:
  • All 8 onboard presets
  • Bluetooth pairing information
  • Power Saving settings
  • Looper tracks (cannot be backed up)
Back up your presets before resetting:
• Backup Presets Saved on the Spark Amp

Tutorial Video

Instructions

  1. Ensure the Unit is connected to the power supply and powered off:
    • Ensure the amp is connected to the power supply.
    • Make sure the amp is completely powered off.
    • Verify the Power Button LED is off before continuing.


  2. Perform Factory Reset:

    • Press and hold the CH1 PRESET Knob, then press and hold the Power Button simultaneously.
      Screenshot 2024-10-16 at 15.22.31.png

    • Release both buttons when the Power Indicator (next to the MUSIC knob) turns white.
      Screenshot 2024-10-16 at 15.23.41.png

    • Hold the Power Button again until all four preset LEDs blink twice, then release.

      Screenshot 2024-10-16 at 15.24.16.png

  3. Restart Device:

    The Spark EDGE will power off and reset. Turn it back on to complete the process.

Was this article helpful?
7 out of 27 found this helpful
Still need help?
Our support team can help answer questions and solve problems.
Contact Support
Contact Support