Factory Reset for Spark EDGE – Help Center

Follow the steps below to perform a factory reset. This process will reset all the presets stored on the Spark EDGE as well as its Bluetooth pairing information, and Power Saving Setting.

Before performing a factory reset, we strongly recommend backing up the presets you saved on the Spark EDGE to the Spark app.
See also: Backup Tone Presets Saved on the Spark Amp

Tutorial Video

Instructions

Ensure the Unit is connected to the power supply and powered off:
- Ensure the amp is connected to the power supply.
- Make sure the amp is completely powered off.
- Verify the Power Button LED is off before continuing.
Perform Factory Reset:
- Press and hold the CH1 PRESET Knob, then press and hold the Power Button simultaneously.
- Release both buttons when the Power Indicator (next to the MUSIC knob) turns white.
- Hold the Power Button again until all four preset LEDs blink twice, then release.
Restart Device:

The Spark EDGE will power off and reset. Turn it back on to complete the process.