How to Perform a Factory Reset?

1. Turn the device off.

2. Press and hold the “TAP” button when turning on Spark amp, release the TAP button when it starts to blink.
Screenshot_2020-01-16_15.33.06.png
3. Long-press the blinking "TAP" button until all four (1~4) LEDs blink once, then release the TAP button.
Screenshot_2020-01-16_15.26.53.png
*The TAP button needs to be released as soon as all four LEDs start to blink.
*Short press the TAP button to abort factory reset.

4. If "TAP" button is blinking and CH1 LED is on, the factory reset process is completed.
*This process will reset all four presets stored on the hardware as well as bluetooth pairing information. Forget device in bluetooth settings before connecting again after factory reset.

Factory Reset Video:

If you still experience the same issue with your Spark guitar amp after factory-reset, please send us a request directly at support@positivegrid.com, we will follow this up and  address it immediately.

Was this article helpful?
13 out of 17 found this helpful
Need More Help? Contact Us