Spark Factory Reset & Bluetooth Reset

Factory Reset

1. Turn the device off.

2. Press and hold the “TAP” button when turning on Spark amp, release the TAP button when it starts to blink.
Screenshot_2020-01-16_15.33.06.png
3. Long-press the blinking "TAP" button until all four (1~4) LEDs blink once, then release the TAP button.
Screenshot_2020-01-16_15.26.53.png
*The TAP button needs to be released as soon as all four LEDs start to blink.
*Short press the TAP button to abort factory reset.

4. If "TAP" button is blinking and CH1 LED is on, the factory reset process is completed.
*This process will reset all four presets stored on the hardware as well as Bluetooth pairing information. Forget device in Bluetooth settings before connecting again after factory reset.

 

Factory Reset Tutorial Video




 

Bluetooth Reset

1. Turn the device off.

2. Press and hold the “Preset 4” button (for 3 sec) when turning on Spark amp, release the TAP button when it starts to blink.

*Remove Spark Amp from recognized devices in Bluetooth settings before pairing again.


If you still experience the same issue with Spark after factory-reset, please send us a request via this link. We will follow this up and address it immediately.

 

 

Was this article helpful?
272 out of 400 found this helpful
Need More Help? Contact Us