Main Panel
Footswitches (1-4)
Switches 1-4 perform different actions depending on the selected mode. Hold the BANK switch to change modes.
Footswitch Indicators
Shows the current preset/effect status.
Battery Indicator
Shows battery status:
- Solid Green: Fully charged (1% - 100%)
- Solid Yellow: Low battery (about 21–60 minutes remaining)
- Solid Red: Needs charging (less than ~20 minutes remaining)
-
Flashing Green/Yellow/Red: Charging
Connection Indicators (AMP / APP)
Shows the connection status to the REACTOR amp or app:
- Solid Blue: Wireless connection
- Flashing Blue: Pairing mode
- Solid Green: Wired connection
Rear Panel
Power Button
Hold to turn REACTOR Control on or off.
Function Button
Used for advanced functions like performing a factory reset.
Expression Pedal Input (EXP)
Connect a TRS expression pedal to control Wah or Volume — assignable in the REACTOR App.
REACTOR Amp Output
Connect directly to the REACTOR Control jack on the rear panel of your REACTOR amp using a 1/4" TRS cable.
USB-C Charging Port (DC IN 5V/2A)
Connect the supplied USB cable to charge.