← Back to REACTOR Amp User Guide
Restore your REACTOR to its original factory settings. Use this if you're experiencing issues or want to start fresh.
Reset on the Amp
This process will reset all the presets stored on the REACTOR as well as Bluetooth settings.
- Power off the REACTOR.
- Press and hold REVB + TAP buttons simultaneously.
- While holding both buttons, power on the REACTOR.
- Continue holding until the Status LEDs breathe white (about 2 seconds after power on), then release both buttons.
At this point, short press TAP to cancel and exit Factory Reset (or simply power off to cancel). - To confirm, long press TAP — the reset will execute automatically once 3 seconds is reached.
- The amplifier will reset and restart.
Reset with the REACTOR App
Three reset options are available in Settings:
| Option | What It Resets |
|---|---|
| Reset All | All presets + all settings to factory defaults |
| Reset Factory Presets | Presets only (settings preserved) |
| Reset Settings | Settings only (presets preserved) |