REACTOR Control works in two modes: Preset Mode and Effect Mode. Hold the BANK footswitch to switch between modes.
Tutorial Video
Mode 1: Preset Mode
Use this mode to switch between presets on your REACTOR amp.
| Footswitch | Press | Hold |
|---|---|---|
| 1 (DRIVE) | Switch to Preset 1 | — |
| 2 (DELAY) | Switch to Preset 2 | — |
| 3 (GATE) | Switch to Preset 3 | — |
| 4 (COMP) | Switch to Preset 4 | — |
| FX LOOP | Turn on/off FX Loop | Activate Tuner |
| BANK | Switch Preset banks | Switch to Mode 2 |
Mode 2: Effect Mode
Use this mode to toggle individual effects on your REACTOR amp.
| Footswitch | Press | Hold |
|---|---|---|
| 1 (DRIVE) | Turn on/off Drive | — |
| 2 (DELAY) | Turn on/off Delay | — |
| 3 (GATE) | Turn on/off Gate | — |
| 4 (COMP) | Turn on/off Comp | — |
| FX LOOP (MOD) | Turn on/off Modulation | Activate Tuner |
| BANK (REVB) | Turn on/off Reverb | Switch to Mode 1 |
Expression Pedal
In both modes, connect a TRS expression pedal to control Wah or Volume in real time.
For detailed setup instructions, see Expression Pedal Setup & Calibration.