Onboard Tuner on Spark 40

To enter the onboard tuner on the Spark 40, simply power on the Spark 40 and hold the TAP/TUNER button on the top panel.

Spark 40 - Top Panel copy.png

 

While in tuner mode, the 4 Preset LEDs will display if the string being played is in tune.

Standby

RNo.jpeg

No signal is detected.

 

Note too low/slightly low

Too Low.png

The note detected is flat.

 

Note slightly high/too high

Too High.png

The note detected is sharp.

 

Note in tune

RCenter.jpeg

The note detected is in tune.

*The Spark (40) will be muted when entering the tuner mode.

 

To exit tuner mode, single-tap the TAP/TUNER button or one of the PRESET buttons.

 

 

The onboard tuner is a chromatic tuner. If you're unsure whether your instrument is noticeably out of tune, we suggest connecting the Spark 40 to the Spark app (Tone Control) to check the note when tuning accurately.

 

Tuner.png

 

 

You can also enter the tuner mode within the Spark app (Menu -> Tuner).

 

Menu.png

Was this article helpful?
218 out of 266 found this helpful
Need More Help? Contact Us