Custom Dial Configuration

 

Desktop


1. First, connect to your BIAS Head/BIAS Rack via the supplied USB cable, then access the settings menu by clicking the settings icon in the top right corner.




2. A list will appear for you choose what you would like to assign that dial to; The Custom Knob was designed so you could add any part of BIAS Amp of your choosing to the front panel of the BIAS Head/BIAS Rack. From the preamp Hi/Low cut frequencies - to the BIAS Adjust for either the preamp or the output valves, the choice is yours!

 

 

Mobile

To set the Custom Dial settings via Mobile, please follow the steps below:

 

1. First, connect your iPad with BIAS Head/BIAS Rack via Bluetooth, then access the settings menu by tapping the settings icon in the top right corner.


2. Here you’ll see the Noise Gate option. The Noise Gate is automatically active by default on each preset and you can customize it from here. By default, the Custom Dial is set to the threshold of the Noise Gate as well so you can adjust from the BIAS Head/BIAS Rack's front panel.


3. Scroll down and tap on Custom -  You’ll see it’s currently set to the default Noise Gate function.


4. A list will appear showing you all of the parameters BIAS Amp has to offer. The Custom Knob was designed so you could add any part of BIAS Amp of your choosing to the front panel of the BIAS Head/BIAS Rack. From the Preamp Hi/Low cut frequencies - to a BIAS Adjust for either the preamp or the output valves, the choice is yours!

 

Was this article helpful?
2 out of 2 found this helpful
Need More Help? Contact Us

Comments

Article is closed for comments.