Spark EDGE Firmware Update (OTA)

Before you begin

1. Update the Spark app to the latest version.
2. Back up your customized presets on the amp. For guidance, refer to: Backup & Restore Tone Presets .
3. Make sure Spark EDGE’s power cord is connected throughout the update process.

Tutorial Video

OTA/Over-the-air Update

1. Launch the Spark app and connect to Spark EDGE.

2. The Spark app will prompt you to update if a firmware update is available.
   
   

3. You will be prompted to connect to Wi-Fi to proceed.

   Spark EDGE may temporarily disconnect from the app during this process. Please follow the on-screen instructions.
4. Once connected to Wi-Fi, the firmware update should start automatically. Ensure the app remains open and active, and that Spark EDGE stays powered on.
5. After the update, you will receive an on-screen notification, and the amp will automatically turn off.
6. You can check the firmware version of the Spark EDGE by clicking on the product card when it's connected to the Spark app.
   

   

   To verify if the latest firmware is installed, please refer to the Spark EDGE Firmware Release Notes .

Need Help?

Common issues during OTA update:

• WiFi keeps scanning and nothing happens
• Entered wrong WiFi password
• Can't connect Bluetooth after update
• Won't turn on after update
• View all troubleshooting solutions

Prefer offline update?
See Spark EDGE Firmware Update (USB)