Global Parameters

 

Screen_Shot_2021-08-04_at_12.07.09.png

The global parameters in the bottom bar include those for the Noise Gate and Reverb. Any changes to parameter values here affect BIAS Amp 2 overall.

Noise Gate

The Noise Gate reduces noise from an input such as a microphone or electric instrument. It is particularly useful for reducing hum or other backgrounds electrical noise.

THRESHOLD - Turn the threshold knob until the noise stops or decreases to an acceptable level.  

DECAY -  Decay sets the rate at which the Noise Gate will attenuate the signal once it drops below the threshold. Higher values will make the signal fade faster once it drops below the threshold.

Input and Output Volume

You can control the overall input and output volumes using their respective sliders in the control bar. Adjust the input volume slider to optimize the input level for your particular guitar pickup. To get the best signal-to-noise ratio, drag the input slider so that when you play your guitar the very loudest, the LEDs in the input level meter hit 0dB. The lock switch for the input-volume slider prevents you from changing the input volume accidentally.

Quick Snap

BIAS Amp 2 offers 8 quick presets for instantly saving the current global settings. Just press and hold one of the 8 slots to save or overwrite. This is a useful tool to help you do A/B comparisons during your sound development or store your favorite amp settings for instant recall.

Was this article helpful?
0 out of 0 found this helpful
Need More Help? Contact Us