Spark PEDAL Firmware Update (OTA) – Help Center

Spark PEDAL updates its firmware wirelessly through the Spark app. When a firmware update is available, the Spark app will notify you.

Before You Begin

Update the Spark app to the latest version.
Back up your customized presets. See Backup & Restore Tone Presets.
Make sure Spark PEDAL has enough battery, or connect the USB-C power cable during the update.
Have a Wi-Fi access point with internet connection nearby.

Launch the Spark app and connect to Spark PEDAL.
If a firmware update is available, the Spark app will prompt you to update.
You will be prompted to connect to Wi-Fi to proceed.

Spark PEDAL may temporarily disconnect from the app during this process. Please follow the on-screen instructions.
Once connected to Wi-Fi, the firmware update should start automatically. Ensure that the app remains open and active, and that Spark PEDAL stays powered on.
After the update is complete, you will receive an on-screen notification, and Spark PEDAL will automatically turn off.
You can check the firmware version of the Spark PEDAL by clicking on the product card when it's connected to the Spark app.

Do not power off Spark PEDAL or close the Spark app during the update.

Common issues during OTA update:

Prefer offline update?
See Spark PEDAL Firmware Update (USB).